• James Brown
• December 1, 2022
• 4 Comments

It doesn’t matter if you are a mechanic/car owner. Knowing how to clean up old oil stains on the garage floor is vital. The garage is the location for maintenance and repairs, so oil drips from the garage floor will be inevitable. You cannot do processes such as engine oil changing, suspension, CV joints changing, and greasing without leaving oil stains. If these oil stains are not removed properly, they can damage the garage floor. After a while, it could be an eyesore. It is possible to avoid this by learning how to remove old oil stains. The rest of this article will help you.

Despite the many ways to get rid of old oil stains, garage floors still have them. Sometimes this is because of the wrong technique. Oil stains can become stubborn the longer they sit, so what worked well for week-old oil stains may not be effective for an older oil stain. The article outlines several ways you can remove oil stains from garage floors. So you can choose the right method for you.

Concentrated Soap Method

For old oil stains, you could use concentrated soap to clean your garage. Just be sure to not let the vapors get into your eyes. It is a great solution to remove oil from the epoxy garage flooring. Here is how it works:

Apply some of the concentrated soap to the oil stain. Allow it to soak for a bit. With a stiff brush (preferably a tub brush), scrub the old oil stain using concentrated soap. After you are done, rinse the area with a hose. Turn the pressure up to ensure the stream is strong. Check the stain after about a minute. You can continue the process until you are happy with the result.

The Cat Litter Method

Make sure the oil stain is completely covered before you grind it into an oil stain. The oil can be left to sit for between one and several hours, depending on the age of your oil stain. You can then dispose of the oil stains after they have remained for a while. You can try removing oil stain with concentrated liquid soap. You should be generous in your soap application. After applying the soap, rinse off with a strong sprinkling. Next, check for oil staining and repeat as necessary.

The Tsp Method

TSP stands short for Trisodium phosphate. You should use rubber gloves and eye protection before using this chemical. Begin by adding 1 cup of TSP per gallon of warm water. After that, you will pour some TSP onto the oil stain. It should sit for between 20 and 30 minutes. You can then scrub the area with a stiff toothbrush. Repeat this process until satisfied.

The Bioremediation Method

This eco-friendly approach uses microorganisms as concrete stain remover. Although it takes longer than the others, this is the easiest method to remove stubborn oil stains. It is one of the best methods to remove oil stains from concrete floors. The microbial oil stain remover can be applied using a sprayer or pump. This remover is usually in powder form. The solution needs to be moistened to activate the microorganisms. Allow the solution to absorb oil and do its work. It may be possible to let the stain sit for up to 24 hours, depending on how old it is. After the oil has been absorbed by the solution, wipe the area clean with soap and warm water. This is such a powerful method, that it takes twice the time to apply the solution.

Concrete Degreaser

This works best for stubborn oil stains. You need to find the best stain remover. Here are some ways to remove old oil stains on concrete. Warm water is used to moisten the affected areas. You can then apply the concentrated degreaser to the stain. Let the degreaser soak for at least 5 minutes, then scrub the area as hard and as much as you can. You must ensure that the degreaser is not dried while you are cleaning it. Use more degreasers, if necessary. After scrubbing, clean up the residue and rinse off the area.